Common Configurable Settings; Changing The I2C Device Address; Disabling The Internal Input And Output Terminations; Disabling Input Terminations - Renesas FemtoClock 2 User Manual

FemtoClock®2 GUI User Guide

11. Common Configurable Settings

11.1 Changing the I2C Device Address

1. Enter the configuration view.
2. Type "I2C" into the search bar.
3. Change the 'TOP.SSI.I2C_ADDR_CNFG.i2c_addr' setting to the desired address.

11.2 Disabling the Internal Input and Output Terminations

11.2.1. Disabling Input Terminations

1. Go to the block diagram view.
2. Click on the Inputs block.
3. Enable/Disable the terminations under the "Terminations" header.
R31US0004EU0100 Rev.1.0
Apr 22, 2021
Page 17