P
RODUCT DESCRIPTION
Additional material guiding disc
The additional material guiding disc [18A] improves
side guiding of the material roll. This option is especially
recommended for processing very narrow label materi-
al (< 30 mm in width).
Capacitive label sensor
Optional sensor, required for processing transparent la-
bels [19A]. The sensor is mounted on the rods of the
dispensing edge holder.
Applicator interface
Additional board [20A]; makes it possible to control al-
most all applicator types.
15 | Options
[18] Additional material guiding disc (A)
[19] Capacitive label sensor (A).
[20] Installed applicator interface (A) on an ALX 73x RH.
Operating manual ALX 73x | file version 01 | 03/2012
ALX
73x
A
A
A