Standalone Mode - Novexx Solutions ALX 73 Series Operating Manual

P
RODUCT DESCRIPTION

Standalone mode

In standalone mode, print jobs are not transferred via data cable but are instead stored
on a memory card. You can access them there from the printer control panel or using
a connected keyboard.
Activate standalone
1. Switch off the machine.
mode
2. Save relevant print jobs in the \Formats directory on the memory card.
3. Insert the memory card in the printer's card slot.
4. Switch on the machine.
5. Press Online+Esc keys.
Starting a print job
1. Activate standalone mode as described above.
2. If there are several print jobs: Press the feed/apply keys keys until the required
3. Press the online key to confirm the selection.
4. Press the online key to confirm the number or the Esc key to delete the number.
5. Proceed in the following manner for each required digit:
6. Press the online key twice to confirm the selection.
7. You can also optionally press the online+Esc to switch to online mode.
31 | Printer operating modes

Files with print jobs must have the ending *.for.
Initial operating mode: online or offline.
Screen:
Select file
a
Avery.for
a) Filename of the print job. If there are several print jobs:
filename of the first print job in alphabetical order.
Screen if no file was found:
Standalone
No files!
print job appears.
Screen:
Enter quantity
a
x
a) Assignment for quantity (in this case x) is included in the
print job.

Depending on the print job, the user may be prompted for additional entries.
– Press the feed/apply key to select a number from 0 to 9.
– Press the online key to move to the next digit.
The print job is now processed.
Operating manual ALX 73x | file version 00 | 03/2012
ALX
73x