Table of Contents
Advertisement
ETC Installation Guide
ColorSource Spot jr v2.0/v3.0
Quick Reference
DMX Control Channels
5ch
DMX
Channel
(5 channel)
1
Intensity
2
Red
3
Green
4
Blue
5
Strobe**
6
*Original ColorSource Spot jr fixture uses blue in channel 4; Deep Blue fixture uses indigo in
channel 4.
**Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate
from 1 per second up to 33 per second.
Error Codes
There are three error codes that may be shown on the user interface.
CAL
: Screen toggles between
•
the color calibration. The fixture will need to be returned to the ETC
factory; contact your local dealer to set up a repair.
OtP
: Screen toggles between
•
has gone into over-temperature protection mode to avoid damaging the
fixture. Once the fixture has self-cooled, the error will automatically clear.
No App
•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC (visit etcconnect.com/contactETC).
ColorSource Spot jr
dir
(Direct)
Intensity
Red
Green
Blue/Indigo*
Lime
Strobe**
: Screen toggles between
1ch
(1 Channel)
Intensity
CAL
Err
and
to indicate a problem with
OtP
Err
and
to indicate that the fixture
no
APP
and
Page 16 of 16
rgb
(RGB)
Red
Green
Blue
to indicate that the
ETC
Advertisement
Table of Contents
