ETC Installation Guide
ColorSource Spot Pearl v1.7
Quick Reference
DMX Control Channels
ct
DMX
Channel
(Variable Color Temperature)
1
2
3
4
*Use DMX values of 0 or 255 for no strobe. Use values of 1–254 to increase the strobe rate
from 1 per second up to 33 per second.
Error Codes
There are three error codes that may be shown on the user interface.
CAL
•
the color calibration. The fixture will need to be returned to the ETC
factory; contact your local dealer to set up a repair.
OtP
•
has gone into over-temperature protection mode to avoid damaging
the fixture. Once the fixture has self-cooled, the error will automatically
clear.
No App
•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.
ColorSource Spot Pearl
Intensity
Color temperature
: Screen toggles between
: Screen toggles between
: Screen toggles between
dir
(Direct)
Intensity
Warm white
Cool white
Strobe*
CAL
ERR
and
to indicate a problem with
OtP
ERR
and
to indicate that the fixture
no
APP
and
Page 16 of 16
1ch
(1 Channel)
Intensity
to indicate that the
ETC