Table of Contents
Advertisement
E T C S o u r c e F o u r L E D Q u i c k G u i d e
S o f t F o c u s D i f f u s e r
Step 1:
Step 2:
Step 3:
A d d r e s s
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
* DMX address is not needed if using standalone or master/slave control.
F e a t u r e s
Quick Color (Lustr+, Series 2 Lustr, Series 2 Daylight HD, Ser ies 2 Tungsten HD, and
Studio HD)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This
feature overrides any presets or sequences previously selected and is only available when
there is no external DMX signal to the fixture.
N o t e :
To select a Quick Color:
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Sou rc e Fo ur LED Prof i le
All manuals and user guides at all-guides.com
Install the diffuser into an A-Sized Pattern holder.
Install a pattern in front of the diffuser, if needed.
Insert the pattern holder with diffuser into the Pattern holder slot, making sure the
writing on the diffuser faces the front of the fixture.
From the home screen, press [
In the Main Menu, scroll to DMX Start Address, press [
Use [
] or [
] to scroll to the desired fixture address.
Press [
] to select the address number.
Press [
] to return to the home screen.
Exiting the Quick Color menu will return the fixture to the state it was in prior to
entering the menu.
Within the Presets and Sequences screen, scroll to Quick Color and press [
Scroll to Color and press [
Scroll to the desired color and press [
Scroll to Intensity and press [
Scroll to adjust the fixture's intensity and press [
To exit the Quick Color menu, press [
] to open the Main Menu.
].
].
].
] to commit the selection.
].
Page 4 of 8
Soft Focus Diffuser
].
El ect ron ic T he at re Con tro ls , I nc.
].
Advertisement
Table of Contents
