ETC ColorSource Spot jr v2.0 Installation Manual page 5

ETC Installation Guide
ColorSource Spot jr v2.0/v3.0
Adjust the Tilt
The fixture can be tilted up and down and rotated (panned) as needed.
1. Loosen, but do not remove the yoke locking knob.
2. Tilt the fixture to the desired angle.
3. Tighten the yoke locking knob.
Adjust the Zoom and Focus the Fixture
Use the Zoom knob to adjust the 25°–50° zoom, and use the Focus knob to
adjust the field. Because the Zoom knob and Focus knob are easiest to adjust
when on the bottom of the fixture, avoid mounting the ColorSourceSpot jr in
an orientation where the knobs are on top.
attaches to front
ColorSource Spot jr
Yoke
locking knob
Accessory holder
(optional)
Zoom Focus Shutters
knob knob
Page 5 of 16
Accessory slot
(x4)
ETC