Specifications And Reference; Typical Power Consumption - ETC ColorSource Spot jr v2.0 Installation Manual

ETC Installation Guide
ColorSource Spot jr v2.0/v3.0

Specifications and Reference

For current and complete compliance and specifications, see the ColorSource
Spot jr datasheet at etcconnect.com.
Environment
The ColorSource Spot jr operates in ambient temperatures of 0°C–40°C and
comes with a variable-speed fan. The ColorSource Spot jr is for indoor use
only.
Maximum recommended ambient operating temperature: Ta = 40°C
•
(104°F)
Maximum anticipated external surface temperature at 40°C ambient:
•
Tmax = 48°C (119°F)
External temperatures after 5 minutes of full-brightness operation at
•
25°C (77°F) ambient: 42°C (108°F)
External Temperature (steady state achieved) at 25°C (77°F): 42°C (108°F)
•
Electrical
Operates between 100 V and 240 VAC at a frequency of 50/60 Hz.
•
Maximum power consumption is 200 W.
•
Up to 7 luminaires (15 A max) may be linked via power thru connector (8
•
luminaires total per circuit) when used with an R20 Relay Module or
Unison Echo Relay Panel. Consult breaker trip curves when used with
other equipment. Requires power from a non-dimmable source.
Inrush:
•
120 V: 35 A (first half-cycle)
-
240 V: 45 A (first half-cycle)
-

Typical Power Consumption

Idle
Direct at Full
ColorSource Spot jr
100 V
Power Current
2.1 W 0.05 A
168 W 1.69 A
120 V
Power Current
2.6 W 0.05 A
166 W 1.40 A
Page 12 of 16
230 V
Power Current
2 W 0.06 A
162 W 0.73 A
ETC