Quick Reference - ETC ColorSource CYC Installation Manual

ETC Installation Guide
ColorSource CYC v1.6

Quick reference

DMX control channels
DMX
Channel
1
2
3
4
5
6
7
Error codes
There are three error codes that may be shown on the user interface.

•
with the color calibration. The fixture will need to be returned to the
ETC factory; contact your local dealer to set up a repair.

•
fixture has gone into over-temperature protection mode to avoid
damaging the fixture. Once the fixture has self-cooled, the error will
automatically clear.

•
upgraded fixtures have a software issue. Reload software to clear the
error. If the error persists, contact ETC.
ColorSource CYC v1.6

(5 Channel)
Intensity
Red
Green
Blue
Strobe
: Screen toggles between
: Screen toggles between
: Screen toggles between
Page 12 of 12
 
(Direct) (1 Channel)
Intensity Intensity
Red
Green
Blue
Indigo
Lime
Strobe
 
and
 
and
 
and

(RGB)
Red
Green
Blue
to indicate a problem
to indicate that the
to indicate that the
ETC