Hardware Reference
Fast Ethernet
RJ-45 port LEDs
Gigabit RJ-45
port LEDs
XFP port LEDs
C613-03092-00 REV J
Switch LEDs
The following LEDs report operations and faults on the x900 series switch and
SwitchBlade x908:
Fast Ethernet RJ-45 port LEDs
■
Gigabit RJ-45 port LEDs
■
XFP port LEDs
■
SFP port LEDs
■
System LEDs
■
Stacking LEDs
■
The following LEDs report operations and faults on Fast Ethernet RJ-45 ports.
LED
State
L/A
Green
(Link Activity)
Green flashing
Amber
Amber flashing
D/C
Green
(Duplex/Collision)
Amber
Amber flashing
The following LEDs report operations and faults on Gigabit RJ-45 ports.
LED
State
L/A
Green
(Link Activity)
Green flashing
Amber
Amber flashing
D/C
Green
(Duplex/Collision)
Amber
Amber flashing
The following LEDs report operations and faults on XFP ports.
LED
State
L/A
Green
(Link Activity)
Green flashing
XFP
Green
Amber
Amber flashing
Description
A 100 Mbps link has been established.
100 Mbps activity is occurring.
A 10 Mbps link has been established.
10 Mbps activity is occurring.
The port is operating in full duplex mode.
The port is operating in half duplex mode.
Collisions are occurring.
Description
A 1000 Mbps link has been established.
1000 Mbps activity is occurring.
A 10/100 Mbps link has been established.
10/100 Mbps activity is occurring.
The port is operating in full duplex mode.
The port is operating in half duplex mode.
Collisions are occurring.
Description
An XFP transceiver is installed and a 10 Gb link has
been established.
An XFP transceiver is installed and link activity is
occurring.
An XFP transceiver is installed and enabled. No XFP is
installed if this light is off.
An XFP transceiver is installed but not operating.
The installed XFP transceiver has a transmission fault.
15