Installation Guide Linear Rotary Motors
7.4 Shaft-Hub Clamping
Since both rotary and linear movements are carried out with linear motors, a type of shaft load attachment
must be selected which can absorb both torques and forces in the longitudinal direction. A friction-locked
connection is created with the aid of a shaft-hub clamping.
Ordering information
Item
RS01-SS20x38
7.4.1 Dimensions and Technical Data
Item
For shaft
RS01-SS20x38
T = transmittable torque at F
F
= transmittable axial force at T = 0.
ax
T
= fastening torque of the screws.
A
D = external exposure tolerance.
7.4.2 Mounting
•
The shaft-hub clamping has to sit inside the bore by at least the clamp lenght (21 mm).
•
Slightly oil the shaft-hub clamping before mounting, do not use molybdenum disulphide
or fat.
•
Tighten screws opposite each other 180 degrees offset in several steps to tightening
torque T
Page 30 / 41
Description
Shaft-hub clamping for 20mm shaft
T
[Nm]
20 mm
179
= 0.
ax
(see above for details).
A
F
T
ax
A
[kN]
[Nm]
17
10
PR02-70
ENG
Item-No.
0230-0100
D
[mm]
38H9
NTI AG / LinMot
Weight
[g]
100