Creating The Alarm Texts Via Win512 Version 2.7.X - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
16.27.1
Alarm text
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x

Creating the alarm texts via Win512 version 2.7.x

104
In the dialog box for any alarm point (e.g. a detector/sensor), there
is a "Text" field where the alarm text for that alarm point can be typed
(or edited). The alarm text will be shown in the c.i.e. display when
this alarm point has activated fire alarm.
Text editor
The alarm text can, as an alternative, be typed (or edited) in the
Win512 version 2.7.x "Text editor" (menu Text | Edit).
No matter where the text is typed, it will be shown on both places.
Explanations:
Zone-Address column
Shows the already programmed alarm points (e.g. 001-01, 001-02,
002-01 etc.).
Only the texts in the "Text" column have to be typed / edited.
Shows also the already programmed zones, i.e. I/O unit 3361 zone line
inputs programmed with address "00" (i.e. ZZZ – 00) and 8 zones
expansion board 4580 zone line inputs.
Only the texts in the "Text" column have to be typed / edited.
104
In Win512 version 2.7.x.
107