Nd Name; Network; Version - Panasonic AK-HCU250P Operating Manual

ND NAME

This is the selection screen for the ND NAME menu.
Item
ND FILTER1 NAME 5 characters
ND FILTER2 NAME 5 characters
ND FILTER3 NAME
5 characters
ND FILTER4 NAME 5 characters
NOTE
● The name set here is displayed in the status display
Characters which can be used:
Alphanumeric characters, spaces, ! # % & ' ( ) * + , - . / : ; < = > ? [ ] _ ~

NETWORK

This is the selection screen for the NETWORK menu.
Item
IP ADDRESS (Factory setting:
192.168.0.20)
SUBNETMASK (Factory setting:
255.255.255.0)
DEFAULT GATEWAY (Factory setting:
192.168.0.1)
ROP PORT 49152 to 49299
SET EXECUTE -
MAC ADDRESS Display only

VERSION

This is the selection screen for the VERSION menu.
Item
SYSTEM
MAIN FPGA
RET FPGA
USC FPGA
Setting value
Sets the name of the ND filter 1 (maximum of 5 characters).
Sets the name of the ND filter 2 (maximum of 5 characters).
Sets the name of the ND filter 3 (maximum of 5 characters).
Sets the name of the ND filter 4 (maximum of 5 characters).
Setting value
Set the IP address.
Set the subnet mask.
Set the default gateway.
Set the port number used for connecting to the ROP.
When you press the [SELECT] button, [NETWORK SET EXECUTE NO/YES]
appears. Select [YES] to apply the configured [NETWORK] information to the unit.
If this operation is not performed, the changed [NETWORK] settings will not be
applied. In addition, if you exit the menu without performing this operation, the
settings will return to their original values.
Displays the MAC address.
Setting value
Display only Displays the SYSTEM version of the unit.
Display only Displays the MAIN FPGA version.
Display only Displays the RET FPGA version.
Display only Displays the USC FPGA version.
● Displayed when the 4K OPTION board is fitted.
Setting details
Setting details
Setting details
- 50 -
CCU menu
___ indicates factory default settings.