Printer - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
7
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x

Printer

The control unit type 5000 can be with or without a printer depending
on if "PRN" is added in the article number or not. It is mounted on the
front panel door and is connected to the MMI board 5011. See
drawing 512 G3 – 01, sheet 2/2.
When the printer is mounted, the checkbox "Printer board connected
to Main board" has to be marked in the Win512 version 2.7.x "Control
unit properties" dialog box.
The following will / can be printed:
 Alarms (Fire alarms – incl. test mode alarms & Heavy smoke /
heat alarms, etc.)
 Disablements, etc. via menus H4/U1 – U2
 Detectors activating service signal via menu H4/U5
 The event log via menu H4/U6
 The control unit configuration via menu H4/U7
 Activated Interlocking inputs and outputs via menu H9/C1
The printer only – not the mounting frame - is available as a spare
part, type number 5058.
35