S/W Versions; Documents; Applications; Pc Software (S/W) - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
3.2
3.3
3.4
3.5
3.5.1
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
is space for two 28 Ah batteries. Larger batteries (up to 65 Ah) have
to be placed outside the c.i.e.
The batteries and the power supply are connected to the Main board
(5010), which handles the charging of the batteries, etc. See chapter
"Power supply", page 152 for more information.

S/W versions

Due to continual development and improvement, different S/W
versions can be found. When installing a new control unit in a system
with "older" control units, you might have to update the S/W in the
old control units (or download an older version in the new control
unit). The same S/W version is required in all control units in a
TLON network. In a mixed system must only be used the S/W
EBL512 version 2.7.x and EBL512 G3 United version 2.7.x
respectively.

Documents

The following documents are available:
 Planning Instructions (this doc.)
 Operating Instructions MEW01473
 Drawings
Normally, information found in one of the documents is not found in
another document, i.e. the documents complement each other.

Applications

The mixed system is intended for small, medium and large
installations. The intelligent control units offer the system designer
and end user a technically sophisticated range of facilities and
functions. Programming and commissioning of the control units /
system is very easy. (PC software Win512 version 2.7.x and TLON
Manager.)
Start with one control unit and then later when it is required, add more
units. The TLON network makes it possible to install the control units
in one building or in many buildings.

PC software (S/W)

The following PC software is used together with the EBL512 G3
system.

Win512 version 2.7.x

Win512 version 2.7.x is used for programming and commissioning of
one or more EBL512 control units (version 2.7.x) but in a mixed
system (see chapter "Mixed system", page 14) it is also used for the
EBL512 G3 control units (United version 2.7.x), i.e. to:

create / download / backup (upload) the site specific data (SSD)

program convention / configurations / C.U. & system data / etc.
16