Chapter 2. Introduction
M306V0T-RPD-E is used by being connected to the PC4701 emulator main unit. Figure 2.1 shows
the system configuration.
Figure 2.1 System configuration
Following products (1) to (4) are attached to M306V0T-RPD-E.
(1) Emulation pod (M306V0T-RPD-E)
(2) Flexible cable (FLX120-RPD)
(3) Flexible cable (FLX100)
(4) Converter board (FLX-100LCC)
This emulation pod contains emulation memory and debug functions.
This 120-pin flexible cable connects the PC4701 and the emulation pod.
This 100-pin flexible cable connects the emulation pod and the target system.
This board is connected to a socket for 100LCC on the target system.
( 16 / 48 )