Table of Contents
Advertisement
Chapter 3. Specifications
Table 3.1 lists the specifications of the M306V0T-RPD-E.
Table 3.1 Specifications of the M306V0T-RPD-E
Usable emulator
Usable MCU
Usable MCU modes
Evaluation MCU type
Emulation pod clock
Max. operating frequency of emulation pod
Power supply range
Emulation memory
Stack capacity used for emulator
Suspended cycles in run-time debug
Power supply to pod
Connection with target system
Operating temperature range
Storage temperature range
Overseas standards
Item
( 17 / 48 )
Description
PC4701HS, PC4701L
M16C/6V Group MCUs
(1) Single-chip mode
(2) Memory expansion mode
(3) Microprocessor mode
M306V0EEFP
Main clock (Xin): 10.000 MHz
Sub-clock (Xcin): 32.768 kHz
10 MHz, 0-wait (Vcc = 5.0 V)
4.5 to 5.5 V
1 MB
Up to 8 bytes
16-byte dump: About 312 BCLK cycle
16-byte fill: About 283 BCLK cycle
1. Supplied from an emulator
2. The operating voltage of the emulation pod is
determined by detecting the supply voltage of the
target system. When no target system is connected,
or when the supply voltage of the target system is
more than 5.0 V, the operating voltage is 5.0 V.
100-pin LCC package: via FLX-100LCC
5 to 35°C (no dew)
-10 to 60°C
• EMI standards (FCC part15 Class A)
• CE marking (EN55022, EN50082-1)
Advertisement
Table of Contents
