Led Display When The Pc4701 Starts Up Normally - Renesas Emulation Pod M37641T2-RPD-E User Manual

(3) LED Display When the PC4701 Starts Up Normally

After the emulator starts up, check the status of the LEDs on the front panel to see whether emulation
pod operation is enabled or not. Figure 4.1 shows the front panel LED lighting status when the
emulator is turned ON.
When using M3T-PD38 V.3.00 Release 1 or greater
When turning ON the power
When using M3T-PD38 V.2.00 Release 1 or previous version
When turning ON the power
Figure 4.1 LED display when the power turned on
When starting up M3T-PD38
When starting up M3T-PD38
( 39 / 68 )
When the target system is
connected, this LED lights.
When it is not lighting, check
the power voltage of the target
system. When the target system
is not connected, this LED does
not light.
When the target system is
connected, this LED lights.
When it is not lighting, check
the power voltage of the target
system. When the target system
is not connected, this LED does
not light.