Connecting The Cable To The Emulation Pod - Renesas Emulation Pod M37641T2-RPD-E User Manual

(2) Connecting the Cable to the Emulation Pod

Figure 3.16 shows how to connect the FLX120-RPD and the emulation pod.
Figure 3.16 Connecting the emulation pod and FLX120-RPD
Note on Connecting the Cable:
• Always shut OFF power before connecting the cable. Otherwise internal circuits can
be destroyed.
Note on Securing the Screws:
• After connecting the emulation pod to the cable, be sure to secure the screws.
CAUTION
( 35 / 68 )