Connection Diagrams - Renesas Emulation Pod M37641T2-RPD-E User Manual

5.2 Connection Diagrams

Figures 5.1 and 5.2 show the connection diagrams of the M37641T2-RPD-E. These connection
diagrams mainly show the interface section, and the circuits which are not connected to the target
system such as the emulator's control system are omitted.
Figure 5.1 Connection diagram 1/2
( 47 / 68 )
*: Signal processed in emulator
• Switches SW2, SW4, SW5 and
SW6 are not mounted.
• Test pin TP1 is mounted to Pin 1 of
the USB connector (J7).
• C15 and C16 are mounted on the
products whose last letter of the
serial number is "A" or a number.