3.7 Connecting the Target System
You can connect the emulation pod to the target system as shown in Figure 3.17 below.
Figure 3.14 Connecting the emulation pod and target system
*1 These three items are available in one package.
*2 The M3T-FLX-80LCC and IC61-080-081 are included in this emulation pod package.
* To purchase the M3T-FLX100-T, M3T-FLX100-R, M3T-80LCC-QSD, M3T-DUMMY80,
* The IC61-080-081 is a product of Yamaichi Electronics Co., Ltd. For purchasing it or for
Notes on Connecting the Target System:
M3T-FLX-80NRA and M3T-FLX-80NSD, contact your local distributor.
technical information, contact Yamaichi Electronics Co., Ltd. (http://www.yamaichi.co.jp/e/
index.shtml)
• Always shut OFF power before connecting the target system. Otherwise internal
circuits can be destroyed.
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulation pod.
CAUTION
( 36 / 68 )