Connecting The User System - Renesas M3028BT-EPB User Manual

M3028BT-EPB User's Manual

2.9 Connecting the User System

There are eight ways available to connect the emulation probe to user systems as shown in Figure 2.7.
42-pin
0.8mm pitch
M30263T-42SSB
SSOP
Socket frame (x2) *1
M3T-SSOP42B-450 *1
Socket *1
Figure 2.7 Connection of the M3028BT-EPB and user system
Note on Connecting the User System:
Take care not to attach the converter board in a wrong direction. It may cause a fatal damage to the emulator
and user system.
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK, TQSOCKET, CSSOCKET and CSPLUG/W are
trademarks of Tokyo Eletech Corporation.
REJ10J1459-0200 Rev.2.00 Sep 16, 2006
Emulation probe
M3028BT-EPB
48-pin
0.5mm pitch 0.5mm pitch
LQFP
M30260T-48FPD
YQ-GUIDE
(x4) *2
YQPACK048SD
*2
NQPACK048SD NQPACK064SD-ND
*2
●: No. 1 pin
*1: These products are included with the M30263T-42SSB package.
*2: These products are included with the M30260T-48FPD package.
*3: These products are included with the M30291T-64FPD package.
*4: These products are included with the M30290T-80FPD package.
*5: These products are included with the M30280T-85LGF package.
64-pin 80-pin
0.5mm pitch
LQFP LQFP
M30291T-64FPD
YQ-GUIDE
(x4) *3
YQPACK064SD YQPACK080SD
*3
NQPACK080SD-ND
*3
CAUTION
85-pin
0.65mm pitch
TFLGA
M30290T-80FPD M30280T-85LGF
YQ-GUIDE
(x4) *4
*4
CSSOCKET085B1007RE01
*4
Page 30 of 86
2. Setup
*5