If An Error Is Detected In The Self-Check - Renesas M3028BT-EPB User Manual

M3028BT-EPB User's Manual

2.8.2 If an Error is Detected in the Self-check

If the self-check does not result normally (ERROR 1 to ERROR 4 in Figure 2.6), check the following.
(1) Recheck the connection of the emulation probe and PC7501.
(2) Redownload the proper firmware.
Notes on the Self-check:
Disconnect the user system before execute the self-check.
If the self-check does not result normally (excluding user system errors), the emulation probe may be damaged.
Then contact your local distributor.
REJ10J1459-0200 Rev.2.00 Sep 16, 2006
IMPORTANT
2. Setup
Page 29 of 86