Table of Contents
Advertisement
M3028BT-EPB User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on PC7501
emulator debugger displayed
MCU Setting dialog box
of emulator debugger displayed
emulator debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J1459-0200 Rev.2.00 Sep 16, 2006
http://www.renesas.com/en/tools
Not normal
Front panel LED
of PC7501
Normal
Init dialog box of
Normal
Normal
Editor window of
Normal
1. Check emulator system connections.
See, "2.5 Connecting the Power Supply for the Emulator "
(page 24).
2. Redownload the firmware.
See "2.7 Downloading Firmware" (page 27).
3. Restart the PC7501 system.
Not normal/Error displayed
1. Check the operating environment etc. of the
emulator debugger.
See the user's manual of the emulator debugger.
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "5.2 (2 ) MCU Setting Dialog Box Does Not Appear at
Debugger Startup" (page 80)
Error displayed
See "5.2 (3 ) Errors Occur at Debugger Startup" (page 81)
5. Troubleshooting
Page 78 of 86
Advertisement
Table of Contents
