Renesas M3028BT-EPB User Manual page 56

M3028BT-EPB User's Manual
(4) Executing up to the cursor position (Come command)
1. Specifying the Come command
2. After the Come command has finished
REJ10J1459-0200 Rev.2.00 Sep 16, 2006
3. Usage (Emulator Debugger)
Setup procedure for executing COME
command
(1) Click the line in the program display area at which you
want the program to execute.
(2) Click the Come button.
The cursor stops in the position where the come command
was executed.
The statement specified with the come command is not
executed.
Page 54 of 86