Table of Contents
Advertisement
1. INSTALLATION START
Generally, we distinguish 3 different situations of use of this document. You are advised to follow the
relevant path for your particular situation as indicated by the roadmap. The numbers in the roadmap link
to the chapters of interest, avoiding unnecessary reading of irrelevant chapters.
At the end of this chapter you find a list of required materials and tooling to do the job right.
1.1.
Situations
1.1.1.
The APRESA is available on the market as a turn key product, either a 19" rack or a desktop version.
You will find the APRESA software already installed and running on the product. Channel licenses are
activated and interface cards will be installed according to your purchase order by VIDICODE. You are
advised to read the introduction and the go directly to the mounting, software configuration, telecom
wiring, and commissioning sections.
1.1.2.
You prefer to use your own choice of hardware for a variety of reasons. In other words, you have the
liberty to select your preferred server manufacturer like HP, Dell, etc. or use a virtual machine.
As a guide, we have listed the (minimum) hardware requirements of such a system. Refer to the
chapter "Hardware requirements". To install the APRESA software image and do the channel licensing
one is advised to follow the directions as described in the chapter "Software installation".
For the installation of interface cards in your hardware you must follow the directions of the
manufacturer or vendor of that machine.
Finally process the software configuration, telecom wire-tapping and commissioning section.
1.1.3.
If you want to upgrade an existing APRESA system with additional channels or interface card(s) you can
go to the "Upgrade existing installations" chapter.
Existing APRESA systems need channel upgrade when customer business expands after time and
more and more phones needs to be recorded. Adding and configuration of new channels in software is
easy, the main effort here is hardware installation
Note that the APRESA Compact supports standard (NORAID) hard drive only, and is limited to max. 10
channel VoIP or 8 channel TDM or 8 channel Analog (POTS/audio).
INSTALLATION MANUAL APRESA
The "made by VIDICODE" APRESA Server / APRESA Compact.
Software only
Upgrading an existing APRESA
COPYRIGHT © 2011-2017 VIDICODE ®
9
Advertisement
Table of Contents
