Table of Contents
Advertisement
2 Getting started
2.1 Hardware installation
The V-Mic is out-of-the-box ready to use:
•
Insert an SD card (up to 32 GB, FAT32 formatted).
•
Connect a 12V DC plug, USB or a LAN cable with PoE for power.
•
Wait for the red light to go off.
(By default, the V-Mic records from its internal microphone.)
•
Press the button to start recording; the green light goes on.
•
Press the button to stop recording; the green light goes off.
•
The recorded audio is now stored in a WAV file on the SD card.
To fine-tune the audio settings or to setup a connection to external
software, you have to access the settings in the web interface. Then it is
needed to connect with the network, using a browser
V-Mic Manual EN v1.5 Juli 2020
(see
© 2020 Vidicode
here).
4
Advertisement
Table of Contents
Need help?
Do you have a question about the V-Mic and is the answer not in the manual?
Questions and answers