Base Software Update - Vidicode APRESA Series Installation Manual

Base Software Update

3.3.6.
1. Assure that the APRESA that you want to update has a valid S&U license;
2. Log in as administrator (admin) in the web interface;
3. Open the Tools menu, select System;
4. Click the Software update button;
4-A. When Apresa has internet connection, click Check for Update. Then click
Download. It will display a warning if calls are active now. Click OK if it is not a
problem that these currently active calls will not be recorded. Depending on the speed
of the internet connection, it might take a while to download the update.
Or...
4-B. When Apresa has no internet connection, download the update file from
http://www.vidicode.com/softwupd/apresa-update.tgz to your PC. In the Apresa web
interface, select this file on your PC, and click Upload.
After the file uploaded, or after Apresa has downloaded the update itself, Apresa
displays that it is updating the system. When finished, Apresa displays the message
that the update is installed.
5. To check the currently installed version, open the Tools menu, and select System.
Note :
1- The update file works for the all hard drive configurations:
2- The update file works for the hard drive sizes: 500GB / 1T / 2T / 3T
INSTALLATION MANUAL APRESA COPYRIGHT © 2011-2017 VIDICODE ®
37