Table of Contents
Advertisement
12.3. DTP-X0C/PCI+ / DTP-X0C/PCIe+
This type of interface card is typically used for the recording of:
• ISDN-E1 (European type ISDN 'primary' rate, 30 recording channels)
• ISDN-T1 (USA type ISDN 'primary' rate, 24 recording channels)
There are 3 version supporting 1, 2 or 4 trunk lines.
PCI
: 1-TRUNK:DTP-30C/PCI+
PCIe
: 1-TRUNK:DTP-30C/PCIe+
DTP-30C/PCIe +
DTP-60C/PCIe +
DTP-120C/PCIe +
Key specifications overview:
#Trunks
# channels T1 (USA)
# channels E1
Size
Impedance
T1
Impedance
E1
Input interface imp.
Input connector
TAP type
Isolation
Power dissipation
Sample rate
Frequency response
Signal to Noise ratio
Signaling systems
INSTALLATION MANUAL APRESA
2-TRUNK:DTP-60C/PCI+
2-TRUNK:DTP-60C/PCIe+
DTP-30C/PCI+
DTP-60C/PCI+
DTP-120C/PCI+
PCI (drawn) or PCIe X1
1, 2 or 4
24, 48, 96
30, 60, 120
160x112 mm (excluding the bracket)
75 OHM unbalanced / 120 OHM balanced
100-110 OHM balanced
1KOHM
RJ45 (8 pin modular)
Hi-Impedance passive monitoring by parallel connection
500VDC
< 5 W (3V3@1500mA
8KHz
300-3400 Hz (±3dB)
>34 dB
SS1 / SS7 / DSSS1
COPYRIGHT © 2011-2017 VIDICODE ®
4-TRUNK:DTP-120C/PCI+
4-TRUNK:DTP-120C/PCIe+
DWG1140_01
87
Advertisement
Table of Contents
