6.2.
Increasing the storage capacity
Increase of storage capacity is possible by installing a larger hard drive(s). Backup the APRESA and
bring it up on the newly installed larger drive(s).
6.3.
Building or changing a software RAID volume
Changing from NoRAID to RAID1/5 or from RAID1 to RAID5 or vice versa require:
• Backup all your recordings;
• Re-installation of the software in the desired required software NoRAID or RAID configuration;
• Re-installation the channel licenses;
• Restore the recordings;
• Note that you can re-use the original base software- and channel licenses for this machine.
INSTALLATION MANUAL APRESA
COPYRIGHT © 2011-2017 VIDICODE ®
72