Codec License Activation (Optional); General Apresa Configuration; Apresa And Virtual Machines - Vidicode APRESA Series Installation Manual

Table of Contents

3.3.8.

After the system license and recording channels are activated, it is possible to activate the codec

licenses that you have purchased.

• Go to the APRESA WEB-homepage, click: Tools -> System -> System information and copy

(CTRL+C) the "Software serial number" that is displayed;

• Click Options -> System settings > Activate new channel license. This will open the

VIDICODE channel license server on the internet;

• Enter the license key of the codec license (including the dashes);

• Paste (CTRL+V) the serial number of the machine;

• Optionally enter an e-mail address to send the generated license key;

• Click Submit

• Copy (CTRL+C) the generated license key that is displayed

• Move back to the APRESA web interface, and paste (CTRL+V) the key into the License key

input box

• Press Apply and let the recording component restart.

On success, the number of codecs should be updated and displayed in the APRESA web interface.

(click: Tools -> System -> System information)

The APRESA system is now ready for recording using these codec(s).

3.3.9.

The next step is to configure the APRESA to meet the specific needs of the owner or organization. This

is typically done by the assigned administrator employee. Please refer to the Admin manual for further

instructions. The Admin manual can be found on the Application CD and on

www.callrecorderapresa.com

3.4.

For installation under "VM-WARE"

- Check the correct ISO-file for installation

- Select a LINUX DEBIAN 64 Bit environment to run APRESA.

Turn on the BIOS setting "virtual machine". (under device configuration or system security)

INSTALLATION MANUAL APRESA

Codec license Activation (optional)

www.vidicode.com

and

Table of Contents