External Storage Settings - Vidicode V-Mic Manual

3.3.3

External Storage Settings

External Storage via Tunnel
This enables or disables synchronization with V-Archive or Apresa as
the external storage server (Tunnel Server). When enabled, the next
two fields must be filled in. Then a TCP tunnel connection will be
used to send files over. When both Ethernet and Wi-Fi are enabled,
the V-Mic will only use Wi-Fi when there is no cable connected.
External Storage IP Address
The IP address of the external storage server (a PC running V-Archive
or a Call Recorder Apresa). Only fill in an IPv4 address. A hostname,
URL or IPv6 is not accepted.
External Storage TCP Port
This port number is used by the tunnel protocol to send recordings
over to the external storage server. Default on 2016. Firewalls must
be open for this TCP port!
Delete Recordings from SD
To save space on the SD card, the recordings can be deleted after
they have been sent to the external storage server.
Encryption Password
By entering a password here, encryption of the Tunnel protocol is
enabled. This means that all data that is sent to the external storage
server will be encrypted. The password must be the same as is
entered in V-Archive or Apresa, else no files can be decrypted.
Firewalls must have a rule to let through TCP port 2016.
V-Mic Manual EN v1.5 Juli 2020 © 2020 Vidicode 13