Connecting
5.3 Connecting PROFINET IO
Bending radius for the fiber-optic cable
When inserting the FOC duplex wire in the plug adapter and when laying, ensure that the
associated bending radius of 30 mm is not fallen short of. See also the installation guidelines
on fiber-optic cables in the "ET 200 Distributed I/O System
(http://support.automation.siemens.com/WW/view/en/1142470)" or "ET 200 Distributed I/O
System (http://support.automation.siemens.com/WW/view/en/1142470)" manuals.
5.3
Connecting PROFINET IO
5.3.1
Connecting IM 153-4 PN
Introduction
You connect the supply voltage and PROFINET IO to the IM 153-4 PN interface module.
①
②
③
④
74
Front door
Connection for PROFINET IO (with 2 ports)
Connection for supply voltage
Cable holder
Operating Instructions, 04/2022, EWA-4NEB7806006-09
ET 200M