Siemens SIMATIC ET 200M Operating Instructions Manual page 29

5. Set the following parameters:
– in the dialog box DP slave properties for ET 200M
– in the dialog box DP slave properties for SM 321, slot 4 in the configuration table
– in the dialog box DP slave properties for SM 322, slot 5 in the configuration table (see
6. Save and compile the configuration.
7. Download the configuration to the CPU 315-2.
ET 200M
Operating Instructions, 04/2022, EWA-4NEB7806006-09
adopt the default settings
diagnosis: No load voltage yes
Diagnostic alarm: Yes
following figure)
Figure 2-5 dialog box Properties - DP Slave for SM 322
Brief instructions on commissioning
2.1 Commissioning on PROFIBUS DP
29