Log Path Configuration - Printronix Network Interface Card User Manual

Log Path Configuration

Name
Name of the log path. The default names are l1, l2, l3, l4, l5, l6, l7,
and l8.
Logpath Type
Define what type of log information will be tracked for each print job
passing through the associated destination. The types are:
•
•
•
•
•
Figure 11. Log Path Configuration
job - job ID, username, etc.
user - user ID and three messages per job about the start and
finish
checksum - value used when troubleshooting integrity of data
transferred
printer - miscellaneous messages from the printer
i/o port - status of the printer based on the port interface
signals.
Log Path Configuration
Current Log Path Settings
71