Printronix Network Interface Card User Manual page 176

Chapter 7
Novell NIC Configuration (10/100Base-T)
Print Server Setup - HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a User ID and password, type in root for
3. Look under the Novell section and add the new password to the
Pserver Password field.
NOTE: The passwords entered in Netware Administrator or
4. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.
Print Server Setup - Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in root for
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver novell passwd password
NOTE: The passwords entered in Netware Administrator or
4. Reset the unit to ensure the changes take effect:
reset
176
the ID and press ENTER at the password prompt (since
there is no password by default).
PCONSOLE must match the password set on the unit.
the ID and press ENTER at the password prompt since
there is no password by default.
PCONSOLE must match the password set on the unit.