Printronix Network Interface Card User Manual page 179

Changing The NIC Name (NDS And Bindery Setups)
HTML Method
1. Load a Web browser on a network station that can
communicate with the print server over TCP/IP.
2. Direct your Web browser to URL:
http://NICIPaddress/adminConf.html
(e.g., http://192.75.11.9/adminConf.html).
NOTE: If prompted for a User ID and password, type in root for
the ID and press ENTER at the password prompt (since
there is no password by default).
3. Look under the System Information section and enter the new
name into the Name field.
4. Click SUBMIT when done and physically repower the printer to
make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a User ID and password, type in root for
the ID and press ENTER at the password prompt (since
there is no password by default).
2. You should see a prompt with the NIC IP address:
ipaddress:root>
3. At the prompt, enter:
store pserver name name
4. Reset the unit to ensure the changes take effect.
reset
179