Table of Contents
Advertisement
Chapter 4
Windows Host Configuration
Windows Host Configuration
This section covers Windows 2000, Windows NT, Windows
Millennium, Windows 95/98, Windows 3.1, and Printronix Printing
System (PPS) new printer setups.
Windows NT 4.0 Host Setup
This installation procedure assumes that the NIC adapter is
configured with the correct IP address, subnet mask and gateway
(if required). In addition, the administrator can "ping" and Telnet to
the NIC adapter from the server console. If this is not the case, use
the printer front panel to configure the NIC adapter before
proceeding.
1. Click the Start > Settings > Printers.
2. Double-click the Add Printer icon. The Add Printer Wizard
window displays.
3. If necessary, select My Computer and click Next.
4. Click Add Port.
100
Advertisement
Table of Contents
Troubleshooting
