Sco Setup - Printronix Network Interface Card User Manual

Chapter 5

SCO Setup

The default NIC queue name is d1prn, however, the name can be
changed. To verify the queue name, print an E-Net Test Page or
telnet to the adapter and run a "list dest" command.
NOTE: Depending on the shell, preceed the ! character with a \ to
SCO Setup
1. Login as a root or administrator privileges user.
2. Acquire an unused Internet address (IP) from your Network
Administrator and choose a unique name for the NIC adapter.
3. Add your NIC Internet address and host name to your system
host table by appending the following line to the /etc/hosts file:
<Internet address>
Example:
199.230.23.76
4. If you have not installed the SCO RLP (BSD lpd) package
which is part of the TCP/IP package, run mkdev to invoke the
RLP installation script:
#mkdev rip
The following screen displays:
Do you want to install or delete remote printing (i/d/q)?
136
avoid shell script errors.
Remote printing configuration
<host name>
salesdept