Print Path Configuration; Destination Settings - Printronix Network Interface Card User Manual

Chapter 3

Print Path Configuration

Rprinter
Define an RPRINTER setup so the NIC knows to service a
PSERVER.NLM on a Novell file server. Define the PSERVER.NLM
name, the number of the printer serviced by the NIC within this
PSERVER.NLM, and the destination on the NIC you want the print
jobs to pass through.
Print Path Configuration
The NIC print path is the path a print job takes when it reaches the
network adapter. First the job goes to a destination/queue (e.g.
d1prn) where it then passes through an associated model (e.g. m1)
for extra processing and logpath (e.g. l1) for job and printer logging.
Finally the job reaches the NIC's I/O port (e.g. PRN) where it
passes through to the attached printer. The "Print Path" form
displays one destination's settings at a time. From here, you can
then select another destination or you can go directly to an I/O port
to configure port settings.

Destination Settings

Figure 7. Print Path Configuration, Destination Settings
64