Printronix Network Interface Card User Manual page 45

Wireless NIC Configuration Using The Control Panel
LEAP Parameters
LEAP is a Cisco wireless security scheme. The Cisco LEAP allows
for a WEP key timeout that forces re-authentication, resulting in the
derivation of a new WEP key for the session.
•
Auth Method. This feature allows the user to select the
authentication method used for the wireless network interface.
•
Open (the default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a
Symbol RF card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco
RF card installed).
•
LEAP Username
•
LEAP Username (01-15). The first 15 characters of the
LEAP user name (maximum number of characters is 32).
•
LEAP Username (16-30). Characters 16 to 30 of the LEAP
user name (maximum number of characters is 32).
•
LEAP User (31-32). Characters 31 to 32 of the LEAP user
name (maximum number of characters is 32).
•
Reset LEAP User. Resets the LEAP user name to an empty
string.
•
LEAP Password
•
LEAP Password (01-15). The first 15 characters of the
LEAP password (maximum number of characters is 32).
•
LEAP Password (16-30). Characters 16 to 30 of the LEAP
password (maximum number of characters is 32).
•
LEAP Password (31-32). Characters 31 to 32 of the LEAP
password (maximum number of characters is 32).
•
Reset LEAP Pswd. Resets the LEAP password to an empty
string.
45