Printronix Network Interface Card User Manual page 174

Chapter 7
Novell NIC Configuration (10/100Base-T)
Removing Preferred File Server
HTML Method
1. Load a Web browser on a network station that can
2. Direct your Web browser to URL:
NOTE: If prompted for a User ID and password first, type in root
3. Look under the Novell section and remove the name of the
4. Click SUBMIT when done and physically repower the print
Manual (Telnet) Method
1. Telnet to the print server:
NOTE: If prompted for a User ID and password first, type in root
2. You should see a prompt with the NIC IP address:
3. At the prompt, enter:
4. Reset the unit to ensure the changes take effect.
174
communicate with the print server over TCP/IP.
http://NICIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
for the ID and press ENTER at the password prompt (since
there is no password by default).
preferred file server from the File Server field.
server to make the new settings take effect.
telnet ipaddress
for the ID and press ENTER at the password prompt (since
there is no password by default).
ipaddress:root>
store pserver novell fserver del fservername
where fservername is the name of the Novell file server you
want to remove as a preferred file server.
reset