Complete Command List; Store Commands - Printronix Network Interface Card User Manual

Complete Command List

This section outlines the entire NIC command set including the
command syntax, a description, and in most cases, an example for
each command listed.
NOTE: If you see the word ifnum in any npsh commands, you

Store Commands

These commands change the settings stored in flash memory and
do not affect the current or working settings in memory. A power
should substitute a 1 or 2 unless told otherwise. The 1
represents the one network interface (e.g., Ethernet)
supported. The 2 represents the wireless network interface
if it exists in the system.
Store Commands
307