Printronix Network Interface Card User Manual page 336

Chapter 15
Complete Command List
preamble
pmm
defkey
auth
user
pass
txpwr
opts
Status
Quality
Where:
< ifnum > is the interface number for the WLAN device.
< network name > is a 1 to 32 ASCII character string.
< net-mode > is the type of network mode of operation: "adhoc",
"pseudo" or "managed".
< channel-num > is the RF channel being used for communication.
< antenna-type > is the type of antenna ("Primary", "Auxiliary" or
"Diverse").
< speed-flags > is the speeds being used for communication
([1 2 5 11], or "auto").
< len-type > indicates the selected preamble length ("long", "short"or
"default").
< sleep-time > indicates the power-save sleep-time in milliseconds.
If power-save is disabled (time is set to zero), "normal (power-save
off)" displayd.
< key-num > is the number identifying one of the four encryption
keys, starting from one. Encryption is disabled if "Encryption
disabled" displayd.
<auth-method> is the authentication method e.g. open, shared,
kerb, leap.
336
= < len-type >
= < sleep-time >
= < key-num >
= <auth-method>
= <auth-user-name>
= <auth-password>
= < power >
= < option-list >
= < status >
= < comms-quality >