Printronix Network Interface Card User Manual page 342

Chapter 15
Complete Command List
tn dest destination start|stop
Example: tn dest d1prn start
Set the tn autoconnect flag temporarily, to enable (start) or
disable (stop). See "store tn dest destination
[-]autoconnect" command for further definition.
chr <string>
Echo < string> or redirect <string> to an I/O port using the
chr <string> ioport
keycode
Determine the hexadecimal value for a key to be used as the
escape character with the NIC built-in telnet command.
? (Help)
Lists all available commands.
342
.