Printronix Network Interface Card User Manual page 236

Chapter 10
Configuring The AS/400 For Printing
Destination Type (DESTTYP)
Specify *OTHER for the DESTTYP parameter.
Transform (TRANSFORM)
Specify *YES.
Manufacturer Type and Model (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the
WSCO. Select *IBM6400EP for Epson emulation or *IBM6400 or
*IBM42023 for Proprinter Emulation if you have AS/400 V3R2 and
above or V3R7 and above.
Internet Address (INTNETADR)
The IP address of the NIC.
NOTE: You may specify either *INTNETADR (and the NIC IP
To Create An Automatic Remote Output Queue
1. From the AS/400 command line, enter CRTOUTQ.
2. Figure 29 displays in bold the parameters you need to specify.
Send TCP/IP Spooled File (LPR)
Type choices, press Enter.
Output queue
Library
Maximum spooled file size:
Number of pages
Staring time
236
address) or the hostname for the NIC (if you added the
printer to the host table entry as directed in "Configuring A
TCP/IP Host Table Entry" on page 233).
OUTQ
MAXPAGES
> USERNAME
*CURLIB
*NONE