Table of Contents
Advertisement
To dial in VRR through an endpoint's remote control:
•
•
To dial-out from VRR using Web Management page:
For detailed instructions, see To start recording from the Web UI in the section
Starting a Recording.
Managing VRRs
An administrator can edit or delete a created VRR.
To edit or delete a created VRR:
1
2
3
Channel
You can customize video channels on the Polycom® RSS™ 4000 to classify
videos according to subjects. When integrated with Polycom Video Media
Center™ (VMC) 1000 V2.0, videos recorded on the Polycom® RSS™ 4000
can be imported into VMC and classified according to their channels, to
facilitate on-demand business management.
A default channel, named Default_Channel, is built in the system. You cannot
change its name or delete it.
To setup a channel:
1
2
3
4
If the Polycom® RSS™ 4000 and the endpoint are both registered to a
gatekeeper, the dial-in number is [RSS E.164 suffix][VRR number].
For example, if the Polycom® RSS™ 4000 E.164 is 1234 and your VRR
number is 1000, you may dial "12341000".
If the network is not configured with a gatekeeper, the dial-in number is
[RSS IP address]##[VRR number].
For example, if the Polycom® RSS™ 4000 IP address is 172.21.110.2 and
your VRR number is 1000, you may dial "172.21.110.2##1000".
When recording by connecting to the Polycom® RSS™ 4000 system using a MCU
recording Link function, you can specify the VRR to be used by adding the VRR
number when configuring the Polycom® RSS™ 4000 system's E.164 number on the
MCU. For instance, if the E.164 prefix of the Polycom® RSS™ 4000 system is 123
and the number of the VRR to be used is 456, you can enter 123456. If the network is
not configured with a gatekeeper, only the default VRR can be used in the recording
link initiated by MCU.
Click VRR>VRRs in the menu bar at the top of the page.
Click the VRR entry to be edited in the VRR List.
In the ACTIONS area on the left side of the page, click Edit or Delete to
modify or delete the VRR.
Click VRR>Channels in the menu bar at the top of the page.
Click Add in the ACTIONS area on the left of the page.
In the add channel page, enter the channel category name, and any
additional related information if necessary.
Click OK to complete the setup.
Polycom® RSS™ 4000 User Guide
4-5
Advertisement
Table of Contents
