Table of Contents
Advertisement
Chapter 4 – Administrator Configuration
FTP Server Configuration
Before backing up archives, you need to configure FTP server on the
Polycom® RSS™ 4000 for backup.
To configure FTP server for backup:
1
2
Table 4-20
Parameter
Server Address
User Name
Password
Enable SSL
3
When Polycom® RSS™ 4000 successfully connects to configured FTP server,
the Backup/Restore Status on the page displays Connected, and the ACTIONS
area on the left of the page shows available operation items: Backup Now
and Restore Now.
Archives Backup
There are two ways to back up archives on Polycom® RSS™ 4000 to FTP
server: automatic periodic backup and immediate manual backup.
To automatically back up archives:
1
2
Table 4-21
Parameter
Frequency
Start Time
3
To manually back up the recorded files:
4-26
Select Enable Data Backup/Restore in the Data Backup/Restore page.
Configure following parameters in the FTP Server Configuration area:
Description of FTP Server Parameters
Description
Enter the IP address and port of the FTP server.
Enter the account and password for login to the FTP
server. If the FTP server has anonymous logins enabled,
you can click Use Anonymous button to log in using
anonymous account.
Set whether to enable SSL encryption for the
communication between Polycom® RSS™ 4000 and FTP
server.
Click Update to apply these settings.
Select Enable automatic backup on the Data Backup/Restore page to
enable automatic backup function.
Set following parameters:
Description of Automatic Backup Parameters
Description
Select the period for automatic backup, measured in day.
Select the start time of automatic backup.
Click Update to apply these settings.
Click Backup Now in the ACTIONS area on the Data Backup/Restore
page.
Advertisement
Table of Contents
