Edit Normal Preset - Pitney Bowes DM225 Operating Manual

Where is it?
Action...

Edit Normal Preset

What is it?
Where is it?
Action...
Configuration
• An ad (if you have ads in your meter).
• A department account number to custom presets
only (if your meter's accounting feature is enabled).
IMPORTANT!
1. You can't specify a preset postage value that's equal to
or greater than the maximum settable limit.
2. Preset postage values are subject to the high value
warning.
3. If the ad slogan specified by a preset is not available at
the time of recall, the meter displays an error message.
In the Setup Menu.
Select: Options > Setup Menu > Presets–normal/custom
Allows you to select one of the following options:
Edit Normal Preset
Edit Custom Preset
Delete Custom Preset
The Normal Preset key on the control panel lets you select
the meter settings you use most often at the push of a
button. Use this option to assign meter settings (postage
value and ad) to this key.
In the Presets–normal/custom Menu.
Select Options > Setup Menu > Presets–normal/custom >
Edit Normal Preset
The display prompts you to for the postage value you want.
Key in the postage value you want to assign to the normal
preset and press Enter. The display shows the value you
entered and, if your meter has ads, prompts you to select
an ad from the list.
Key in the number of the ad you want, and press Enter. If
your meter has more ads than the display can show at one
time, press the Date/Ad/Insc key to see them. If you don't
want to assign an ad, key in 0 (None) and press Enter.
The display shows the choices you made. Press Enter to
accept them or back (CE/C) to go back if they are wrong.
If everything was OK and you pressed Enter, the meter will
return to the Presets–normal/custom Menu.
3-17