Pitney Bowes DM225 Operating Manual page 14

Introduction
2
3
4
1. Phone Socket
2. Rear Cover
3. Communications This is used to connect your system to an external device
Port
4. Power Inlet
The machine should be left connected and turned ON at all times. Turning the machine
ON and OFF will result in increased ink consumption and associated running costs.
Leaving the machine turned OFF for an extended period of time (over 30 days) may
result in damage to the print head which will not be covered by your warranty or
maintenance agreement.
1-8
1
Plug an analogue telephone line into this socket.
This allows you to add postage automatically using the
one-button refill facility (see Chapter 4).
Open this cover to replace the Ink Cartridge (see Chapter 5).
like a Pitney Bowes 'N' Series electronic postal scale or a
printer. This is a standard RS-232 serial port.
Plug the power cord in here. Make sure you have read the
safety information on page 1-2 before connecting power.
IMPORTANT INFORMATION